Posts Tagged ‘brush’

Using the Roto Brush tool in Adobe After Effects CS5 and max tutorial

When you draw or paint on the frames of a movie, you’re rotoscoping. For example, a common use of rotoscoping is to trace an object, using the path as a mask to separate it from the background so you can work with it separately. Traditionally in After Effects, you drew masks, animated the mask path,max tutorial and then used the masks to define a matte. (A matte is a mask used to hide part of an image so that another image can be superimposed.) While effective, this is a time-intensive, tedious process, especially if the object moves a great deal or the background is complex.

If a background or foreground object is a consistent, distinct color, you could use color keying to separate the object from the background. If the subject was shot against a green or blue background (max tutorial ), keying is usually much easier than rotoscoping.

The new Roto Brush tool in After Effects CS5 is much faster than conventional rotoscoping, and for movies with complex backgrounds, it’s much easier than keying. You use the Roto Brush tool to define the foreground and background elements; thenmax tutorial , After Effects creates a matte and tracks the movement of the matte over time. The Roto Brush tool does much of the work for you, leaving only a little clean-up work to be done.

If a background or foreground object is a consistent, distinct color, you could use color keying to separate the object from the background. If the subject was shot against a green or blue background (green screen or blue screen), keying is usually much easier than rotoscoping.

The new Roto Brush tool in After Effects CS5 is much faster than conventional rotoscoping, and for movies with complex backgrounds, it’s much easier than keying. You use the Roto Brush tool to define the foreground and background elements; then, After Effects creates a matte and tracks the movement of the matte over time. The Roto Brush tool does much of the work for you, leaving only a little clean-up work to be done.

and visit this site http://www.free3dvideotutorials.com

this is good site. this site has information about max tutorial and visit this site

http://www.free3dvideotutorials.com

More Adobe Illustrator Articles

Adobe Illustrator Brush Tutorial – Vector Smoke

This short and easy tutorial is to show you a technique to make a vector smoke brush using Adobe Illustrator.
Video Rating: 4 / 5

3D-Coat Video Manual – Brush Creation

In this video I cover the creation and importation of PSD image files from photoshop and 3D object files as brushes, for use in 3D-Coat.

Using the Brush Tools in Adobe Illustrator CS5

Most people assume that if you’re using brushes in Adobe Illustrator, you must be creating “art.” While this is true sometimes, you can also use brushes in production techniques to save time. I use brushes for many kinds of artwork, including drawing zippers, shirt collars, picket fences, and many other features.

Illustrator comes with five different types of brushes (calligraphic, scatter, art, bristle, and pattern) that reflect the breadth and depth of the results that brushes can achieve. In this article, we’ll focus on two types of brushes that I use with a lot of my production techniques: art brushes and pattern brushes.

In this article, I’ll cover the following:

Creating art brushes
Creating pattern brushes
Brush techniques
Creating Art Brushes

Art brushes are a special animal, misunderstood by most people. You create some artwork, save it as an art brush, and then apply that brush to a path or shape. The art you created is stretched around the path or perimeter of the shape—usually with tragic results.

video tutorialsshows a wonderful example of an art brush applied to a square. I found this art brush by clicking the Brush Libraries Menu button in the lower-left corner of the Brushes panel and choosing Decorative > Decorative_Banners and Seals. I also changed the Stroke Weight of the path to .5 pt in the control panel.

Figure 1 An art brush applied to a square.

Let’s create an art brush by using existing artwork:

With a document open, expand the Brushes panel (see video tutorials). Click the Brush Libraries Menu button in the lower-left corner of the Brushes panel and choose Decorative > Decorative_Text Dividers. Drag one of the banners from the list onto the artboard. (As video tutorials shows, I chose the “Text Divider 20” banner.) A great feature is that once most brushes are made, you can get back the original artwork!

Figure 2 The Brushes panel in Illustrator.

Figure 3 Dragging brush artwork onto the artboard.

Make some changes to the artwork; for example, alter the color, or something like that.

CAUTION

Something to keep in mind: Illustrator doesn’t like gradients in art brushes!

To create your new art brush, select all of the artwork on the artboard. Click the New Brush button to make a brush from the selected artwork. In the New Brush dialog box, select Art Brush and click OK (see video tutorials).

Figure 4 The New Brush dialog box.

In the Art Brush Options dialog box, you can set tons of options. For this example, select Stretch Between Guides, as shown in video tutorials. This great feature, new in CS5, allows you to tell Illustrator what to “stretch” (repeat) around the shape. Dotted lines appear in the preview window in the dialog box. Drag them close to each other. The part of the artwork between the dotted lines is what Illustrator “stretches” (repeats).

Figure 5 Editing the options for the new art brush.

In the Colorization section of the dialog box, choose Tints and Shades from the Method pop-up list. This feature allows you to colorize the brush after applying it to some artwork.

TIP

Like the Tints and Shades method, two other methods let you apply a color to the brush after it’s applied to artwork, but with somewhat different results:

Tints applies the selected stroke color only in tints.
Hue Shift lets you sample a single color in the brush, but this option changes only the sampled color.

When you’re done making your selections in the Art Brush Options dialog box, click OK. Your new brush is saved in the Brushes panel. Create a circle, line, or other shape and apply the new art brush by selecting it in the Brushes panel or from the control panel (see Figure 6).

NOTE

Now you can delete the original brush artwork that you used to make the brush on the artboard.

Figure 6 Applying the art brush.

TIP

To change the size of the art brush as the artwork is stretched along a path, change the Stroke Weight setting.

To edit your new art brush, double-click it in the Brushes panel. If you want to edit properties for the brush when it’s applied to an object (and only that object), select the object on the artboard, and then click the Options of Selected Object button at the bottom of the Brushes panel.

Do you want to update the brush you just made—that is, change the artwork? Easy! Video 1 shows the process in action. To do it on your own, follow these steps:

Drag the brush from the Brushes panel onto a blank area of the artboard. This will give you the original art for the art brush.
Make the changes you want in the artwork (color, transparency, or whatever).
Hold down the Alt key (Windows) or Option key (Mac) and drag the revised artwork on top of the brush in the Brushes panel.
When a line (highlight) appears around the brush, release the mouse button and then the Alt/Option key.
Click OK in the Art Brush Options dialog box.
If a dialog box appears, asking if you want to update the artwork on the artboard, click Apply To Strokes to update the artwork that’s using the brush on the artboard. Once you get the hang of it, it’s no big deal to update a brush.

Related Illustrator Articles

Q&A: How I do to keep preferences in my own created brush in Photoshop cs5?

Question by Abraham Quirarte: How I do to keep preferences in my own created brush in Photoshop cs5?
Hi everybody.
I created brushes in photoshop cs5 and save them, but later when I load that brushes, the special atributes were gone, I know how save an abr brush but if that brush have Shape dinamics settings and later I load it, the alle the settings are missing and I must configure them again, the brush do not is gone only the config.
I hope you can help me thanks.

Best answer:

Answer by DioDeo
Go to window>brush
Then brush presets
on up right corner here is button for drop-down list
here you can choose save and load presets

Know better? Leave your own answer in the comments!

(HD) Add drama with the Adjustment Brush in Photoshop CS4 & Lightroom 2 – Photoshop Week 35

The launch of Photoshop CS4 & lightroom 2 gave us a more powerful way of working with RAW images and it’s called the Adjustment Brush. Digital expert Gavin Hoey www.gavtrain.com shows just how simple and effective the adjustment brush can be.
Video Rating: 4 / 5

???Facebook (Fabian Wybiralla): www.facebook.com ???Twitter: twitter.com ???deviantART: wybi.deviantart.com ???Shirts: wybi.spreadshirt.de ???E-Mail(business only): photoshophelpgerman@googlemail.com ???Facebook (PhotoshopHelpGerman): www.facebook.com ???PhotoshopHelpGerman´s SpeedArt: ?www.youtube.com ???Postfach: Fabian Wybiralla Postfach 10 29 13 45829 Gelsenkirchen Deutschland
Video Rating: 4 / 5

IceflowStudios Design Training – Photoshop: Change Brush Sizes in Photoshop! (HD)

iceflowstudios.com | http To answer the many questions I get asked about this, here are a few very simple ways of changing brush sizes and hardness without accessing the panel at the top. Enjoy!

Hot Pilates App mhlo.co www.mahalo.com During thistutorial Mahalo’s iLife expert, Ken O’Brien, shows you how to add effects to your film in iMovie 11. check out these related Mahalo pages: Learn iMovie 11 – Working With the Event Browser www.mahalo.com Learn iMovie 11 – How to Add Titles www.mahalo.com Learn iMovie – Command Short-cut Quiz www.mahalo.com Learn iMovie – Command Short-cut Quiz 2 www.mahalo.com Learn iMovie – Introduction www.mahalo.com Learn – iMovie Interface Overview www.mahalo.com Learn iMovie – How to Use the People Finder www.mahalo.com Or check out these related Mahalo pages: Learn Adobe Photoshop – Interface Overview: www.mahalo.com Learn Adobe Photoshop – Edit Menu: www.mahalo.com Learn Adobe Photoshop – Layer Menu: www.mahalo.com Learn Adobe Photoshop – Filter Menu: www.mahalo.com Learn Adobe Photoshop – Analysis Menu: www.mahalo.com Learn Adobe Photoshop – Window Menu: www.mahalo.com Learn Adobe Photoshop – Crop Tool: www.mahalo.com Learn Adobe Photoshop – Eyedropper Tool: www.mahalo.com Learn Adobe Photoshop – Lasso Tool: www.mahalo.com Learn Adobe Photoshop – Slice Tool: www.mahalo.com Learn Adobe Photoshop – Marquee Tool: www.mahalo.com Learn Adobe Photoshop – Mixer Brush Tool: www.mahalo.com
Video Rating: 4 / 5

SpongeBob Adobe Illustrator Inking Tutorial #4 – Freehand Brush Inking

CartoonSNAP.com Step by Step Tutorial shows how I drew, inked and painted the new SpongeBob cover for NICK Magazine. Adobe Illustrator freehand brush tool
Video Rating: 4 / 5

VISIT US NOW – www.graphicdesignertips.com Graphic Designer Tips will teach you how to design a professional logo with Adobe Illustrator Creative Suite.

Learn Adobe Photoshop – Brush Panel

Learn Guitar App: Over 50k downloads! mhlo.co In this video, Mahalo expert Gene Shaw will walk you through the foundations of the brush panel. Brush Panel ——————————————————————— You can create millions of custom brushes using the Brush Panel in Photoshop. Sometimes a pencil lead is too soft, and it gives you a darker line than you really want. The same goes for brush bristles or pen tips. If you have the wrong size, shape or amount of wear, you may need to use a different instrument. Sometimes, you’ll have to throw them away entirely. If this ever happens to you in Photoshop, you can simply adjust the size, shape, and even hardness of your brush.1. Open up the Brush Panel by clicking Window — Brush to make sure it’s checked.2. This panel is where you’ll be able to create and change different brushes. Photoshop has already built many presets into the program. The brushes that have drawings instead of the icon of what the brush looks like when you use it are called “bristle brushes.” If you have a Wacom or any other tablet and you click on the “eye” at the bottom of the panel, you’ll see an indicator on the screen that shows you the angle you’re holding your pen at on your tablet, and it also shows you how much pressure you’re applying when you draw a stroke.3. If you choose a brush with longer bristles, you’ll find that they actually spread out according to how much pressure you apply with your pen on the tablet.4. You can
Video Rating: 5 / 5

Using the Brush Tools in Adobe Illustrator CS5

Using the Brush Tools in Adobe Illustrator CS5

Most people assume that if you’re using brushes in Adobe Illustrator, you must be creating “art.” While this is true sometimes, you can also use brushes in production techniques to save time. I use brushes for many kinds of artwork, including drawing zippers, shirt collars, picket fences, and many other features.

Illustrator comes with five different types of brushes (calligraphic, scatter, art, bristle, and pattern) that reflect the breadth and depth of the results that brushes can achieve. In this article, we’ll focus on two types of brushes that I use with a lot of my production techniques: art brushes and pattern brushes.

In this article, I’ll cover the following:

Creating art brushes
Creating pattern brushes
Brush techniques
Creating Art Brushes

Art brushes are a special animal, misunderstood by most people. You create some artwork, save it as an art brush, and then apply that brush to a path or shape. The art you created is stretched around the path or perimeter of the shape—usually with tragic results.

video tutorialsshows a wonderful example of an art brush applied to a square. I found this art brush by clicking the Brush Libraries Menu button in the lower-left corner of the Brushes panel and choosing Decorative > Decorative_Banners and Seals. I also changed the Stroke Weight of the path to .5 pt in the control panel.

Figure 1 An art brush applied to a square.

Let’s create an art brush by using existing artwork:

With a document open, expand the Brushes panel (see video tutorials). Click the Brush Libraries Menu button in the lower-left corner of the Brushes panel and choose Decorative > Decorative_Text Dividers. Drag one of the banners from the list onto the artboard. (As video tutorials shows, I chose the “Text Divider 20” banner.) A great feature is that once most brushes are made, you can get back the original artwork!

]]>

Figure 2 The Brushes panel in Illustrator.

Figure 3 Dragging brush artwork onto the artboard.

Make some changes to the artwork; for example, alter the color, or something like that.

CAUTION

Something to keep in mind: Illustrator doesn’t like gradients in art brushes!

To create your new art brush, select all of the artwork on the artboard. Click the New Brush button to make a brush from the selected artwork. In the New Brush dialog box, select Art Brush and click OK (see video tutorials).

Figure 4 The New Brush dialog box.

In the Art Brush Options dialog box, you can set tons of options. For this example, select Stretch Between Guides, as shown in video tutorials. This great feature, new in CS5, allows you to tell Illustrator what to “stretch” (repeat) around the shape. Dotted lines appear in the preview window in the dialog box. Drag them close to each other. The part of the artwork between the dotted lines is what Illustrator “stretches” (repeats).

Figure 5 Editing the options for the new art brush.

In the Colorization section of the dialog box, choose Tints and Shades from the Method pop-up list. This feature allows you to colorize the brush after applying it to some artwork.

TIP

Like the Tints and Shades method, two other methods let you apply a color to the brush after it’s applied to artwork, but with somewhat different results:

Tints applies the selected stroke color only in tints.
Hue Shift lets you sample a single color in the brush, but this option changes only the sampled color.

When you’re done making your selections in the Art Brush Options dialog box, click OK. Your new brush is saved in the Brushes panel. Create a circle, line, or other shape and apply the new art brush by selecting it in the Brushes panel or from the control panel (see Figure 6).

NOTE

Now you can delete the original brush artwork that you used to make the brush on the artboard.

Figure 6 Applying the art brush.

TIP

To change the size of the art brush as the artwork is stretched along a path, change the Stroke Weight setting.

To edit your new art brush, double-click it in the Brushes panel. If you want to edit properties for the brush when it’s applied to an object (and only that object), select the object on the artboard, and then click the Options of Selected Object button at the bottom of the Brushes panel.

Do you want to update the brush you just made—that is, change the artwork? Easy! Video 1 shows the process in action. To do it on your own, follow these steps:

Drag the brush from the Brushes panel onto a blank area of the artboard. This will give you the original art for the art brush.
Make the changes you want in the artwork (color, transparency, or whatever).
Hold down the Alt key (Windows) or Option key (Mac) and drag the revised artwork on top of the brush in the Brushes panel.
When a line (highlight) appears around the brush, release the mouse button and then the Alt/Option key.
Click OK in the Art Brush Options dialog box.
If a dialog box appears, asking if you want to update the artwork on the artboard, click Apply To Strokes to update the artwork that’s using the brush on the artboard. Once you get the hang of it, it’s no big deal to update a brush.

Take advantage of Wacom tablets and displays to maximize your productivity Adobe After Effects CS5. Working with a pen is a natural way to increase control. Set up shortcuts for the tools that you use most, like modifiers, menus, brushes and more.